Gasboy SiteOmat Maintenance Manual - Manual (Page 119)

115 SiteOmat Setup and Maintenance Manual – MDE 4817G
Table 6-3. Setup PAIS Parameters
Parameter Description
PAIS IP & Port
IP address and port for communication between the internal
payment application and the Controller (for view only)
Tasks
Number of tasks to be simultaneously handled by the processor
(namely, the number of payment terminals in use in the station)
App Log
Enables application logging. Select the Enable checkbox and
enter the destination Port
Comm Log
Enables Controller – Processor communication logging. Select
the Enable checkbox and enter the destination Port
Timeout
Defines the waiting time for response from the processor
Card may not be reused
within
Prevents refueling with the same bank card within the selected
time frame
Pre-authorized amount
Pre-authorizes the card prior to the transaction to the defined
amount
Only show “Declined Card”
on any credit rejects
Sets whether to show the rejection message as received from
payment processor on ORPT display or a generic “Declined
Card” message
End of Day
Activates the End of Day process – the payment application
returns a list of totals (Total amount, Amounts per card type).
The controller saves the data in the EOD summary.
You may do one of the following:
• Select the Daily run enabled checkbox to automatically
run the process on a daily base
 Set Run every X hours to 24 hours and then and
set the hour of the day from Time to run daily
drop-down lists
 Select the frequency from the Run Every X
hours
• Click on the Run EOD Now button to manually activate
the EOD process
Credit Processor
Payment processor in use, selected from the drop-down list
Specific – Processor IP &Port
IP address and port for communication between the internal
payment application and the Processor
Enable Log
Enables UDP logging
Product Map
See section 6-3.2.1