Gasboy SiteOmat Maintenance Manual - Manual (Page 118)

114
SiteOmat Setup and Maintenance Manual – MDE 4817G
Click Modify to save the selections and Close to close the dialog box and return to the Global tab;
or click Close to exit the dialog box without saving the changes.
6-3.1. Open Door Detection
The FFC includes a feature for preventing unauthorized third parties from forcing the sealed FCC
box door.
The FCC generates an alarm in cases where the door was opened: "The door is open".
The function setup procedure comprehends:
a. Physical installation and setup of the detector (described in 8-Port Commverter
Operation and Installation Manual MDE-4820)
b. Feature activation in SiteOmat, as described below:
To activate open door detection, select the Enabled checkbox and set the detector's IP and Port as
defined in the 8-Port Commverter.
6-3.2. Payment Terminal Setup
To set the SiteOmat connection to a third party clearing system, click on the Setup button in the
Payment Terminal section in the Station Parameters screen. The Setup PAIS dialog box appears
(see Figure 6-3).
The various parameters are described in Table 6-3.
Figure 6-3. Setup PAIS Dialog Box –FiPay Processor Specifics