Gasboy SiteOmat Maintenance Manual - Manual (Page 199)

195 SiteOmat Setup and Maintenance Manual – MDE 4817G
8-4.5.5.1.2. Normal Check
[2007-02-11 09:40:45.291 00006930] Nonblock conn
[2007-02-11 09:40:45.361 00006930] Pinging FCC
[2007-02-11 09:40:45.361 00006930] FCC ping OK
[2007-02-11 09:40:50.614 00006930] Nonblock conn
[2007-02-11 09:40:50.732 00006930] Pinging FCC
[2007-02-11 09:40:50.732 00006930] FCC ping OK
[2007-02-11 09:40:55.966 00006930] Nonblock conn
[2007-02-11 09:41:00.959 00006930] Error: Recv select (sock=7) rc=115: Operation now in progress
[2007-02-11 09:41:00.959 00006930] Pinging FCC
[2007-02-11 09:41:00.959 00006930] Ping to FCC failed; retry=0
[2007-02-11 09:41:06.193 00006930] Nonblock conn
[2007-02-11 09:41:06.299 00006930] Pinging FCC
[2007-02-11 09:41:06.299 00006930] FCC ping OK
[2007-02-11 09:41:11.537 00006930] Nonblock conn
8-4.5.5.1.3. FCC Not Responding
[2007-02-08 20:29:07.460 00025928] Ping to FCC failed; retry=0
[2007-02-08 20:29:17.720 00025928] Error: Recv select (sock=6) rc=115
[2007-02-08 20:29:17.720 00025928] Ping to FCC failed; retry=1
[2007-02-08 20:29:27.980 00025928] Error: Recv select (sock=6) rc=115
[2007-02-08 20:29:27.980 00025928] Ping to FCC failed; retry=2
[2007-02-08 20:29:38.380 00025928] Error: Recv select (sock=6) rc=115
[2007-02-08 20:29:38.380 00025928] Ping to FCC failed; retry=3
[2007-02-08 20:29:48.740 00025928] Error: Recv select (sock=6) rc=115
[2007-02-08 20:29:48.740 00025928] Ping to FCC failed; retry=4
[2007-02-08 20:29:48.740 00025928] FCC is not responding... will try to restart.
[2007-02-08 20:29:50.870 00025928] FCC was restarted.
8-4.5.5.1.4. FCC Having Problems with the Pump Server
[2007-02-08 10:55:54.990 00024831] FCC told us to restart PumpServer 200000012
8-4.5.5.1.5. Error Starting Pump Server
[2007-02-08 10:56:05.683 00024831] Failed to find pump server with ID=200000012
[2007-02-08 10:56:05.683 00024831] Could not start pump server with ID=200000012
Need to check configuration, and/or do SysInit.
8-4.5.6. Web Server Monitor Log (WebAccess6000.log, WebComm6000.log)
This log file records the use of the FCC Monitor utility.
Port 6000 is used as the control port for the Monitor.
Note that these log files are primarily intended for use by development.
8-4.5.7. Web Server Watchdog Log
(WebAccess6001.log, WebComm6001.log)
This is the log of the internal watchdog service.
Note that these log files are primarily intended for use by development.
8-4.5.8. Web Server Access Logs
(WebAccessxxxx.log)
This log file records SOAP login sessions originating from the BOS.
Note that these log files are primarily intended for use by development.