Gasboy SiteOmat Maintenance Manual - Manual (Page 114)

110 SiteOmat Setup and Maintenance Manual – MDE 4817G
Temperature
Temperature display inside the fuel tank (Default ºF).
Height (display)
Height of the tank displayed on screens and reports (Default:
inches).
General Section
VAT (percent)
Sets the VAT rates. Currently not in use.
User Inactivity timeout
Sets the time the OrPT displays the same message when waiting for
the user's input.
Auto- Auth Name
This field is not applicable to Home Base stations.
Defines the 'name' assigned to the device in Auto-Authorized
transactions. In cases where a pump is set in the no need for
authorization mode (Normally open or hot pumping) – the pump is
authorized as soon as the handle is lifted without additional
authorization device.
Location code (magic)
This parameter is relevant only for customers using Magic as Head
Office system. Otherwise set 0 as a blank value.
Department Color
This parameter is applicable only to systems using Magic as Head
Office. It defines the devices lists downloaded from Magic to the
OrCU as positive or negative lists.
Zero transactions
Sets the allowed number of transactions whose volume equals to
zero before blocking the dispenser.
Alarm refresh rate
Defines the time frequency for refreshing the alarms screen.
Authorization Timeout
Defines the maximum allowed waiting time after pump is authorized
and before the handle is lifted up.
Employee fleet name
These fields are in use in stations are not applicable to Home Base
stations and their default should not be changed.
Employee fleet code
6-3. ADVANCED STATION PARAMETERS
Click on the Advanced button to set additional station parameters. The Station Parameters dialog
box appears (see Figure 6-2).The supplemental parameters are described in Table 6-2.