Gasboy SiteOmat Maintenance Manual - Manual (Page 212)

208
SiteOmat Setup and Maintenance Manual – MDE 4817G
Figure 8-9. Putty Configuration Screen - 4
8-5.3. Starting the FCC Monitor from the Windows Command Prompt
To start the FCC Monitor, open a command window telnet to the IP address of the FCC at port
6000, e.g.
$ telnet 192.168.1.104 6000
Right-click on the title bar of the command window, select Properties, and click on the Layout tab,
and
• Set the “Screen buffer size” to Width:90, Height:300.
• Set the “Window size” to Width:90, Height:45.
After responding to the password prompt, the main menu is presented.
NOTE
The default password is Admin. Change the
password using the Change the password using the
Change password function.