Gasboy SiteOmat Maintenance Manual - Manual (Page 172)

168
SiteOmat Setup and Maintenance Manual – MDE 4817G
NOTE
It is highly recommended to export the setup data at
this stage. Save the data as a recovery backup file.
A processing message appears, displaying the various steps of the configuration procedure starting
from clearing the existing setup and ending with writing INI files for the pump server (see
Figure 7-32).
Figure 7-32. Processing Message
Once the processing has successfully completed, an Operation Successful message is displayed.
NOTE
If power fails during the reload operation, the system
may be left in the Stop mode: click on the Start
button to restart it when power returns (see
section 8-2).
7-14. VERIFYING DEVICES STATUS
After applying setup, verify that all the devices are successfully communicating and the entire
system is operational. Proceed as follows:
1. Click on the Status button in the left-hand side of the screen. The Status screen is displayed
2. Select the Devices tab (see Figure 7-33). Verify that all the devices status is OK