Gasboy SiteOmat Maintenance Manual - Manual (Page 113)

109 SiteOmat Setup and Maintenance Manual – MDE 4817G
6-2. GLOBAL PARAMETERS
The Global tab (see Figure 6-1) enables the user to set various station definitions as described in
Table 6-1.
NOTE
Several parameters are set already through the
Wizard. This screen enables the user to correct and
modify these definitions.
Table 6-1. Global Tab Parameters
Parameter Description
Station Section
Description
Description of the station.
Email
E-mail address of contact personnel.
Address
Physical address of the station.
Code
Code (identification) number of the station. The Code is defined
during setup and it is highly recommended not to change it after the
station become operational. Note that if a station is part of a
network of stations, this code must be unique across the network.
This code is used to uniquely identify the station in the Head Office.
Language
Language selection which affects the software interface and the
receipt printing. Select the language from the drop-down list.
City
City of the station.
Regional Settings Section
(Select the units from the adjacent drop-down lists.)
Date Format
Date format used in the application (default: MM/DD/YY).
Volume Measurement
Volume measurement (default: Gallons).
Currency Measurement
Currency in use (default: US Dollars).
Density
Fuel density at a certain temperature (Default: lb/ft³).
Height (measurement)
Measurement of tank height level (Default: inches).
Flow Rate
Volume of fuel which passes per unit time (default: gallons per
hour).
Time Format
Time format used in the application (default: HH:MM:SS).
Odometer Consumption
Distance per fuel consumption measurement (default: miles per
gallon).
EH Consumption
Engine hours per fuel consumption measurement (default: hours per
gallon).