Gasboy SiteOmat Maintenance Manual User Manual
Page 85
81
SiteOmat Setup and Maintenance Manual – MDE 4817G
4-4.10. Page 10 – Series 1000 Upgrade
This page (see Figure 4-20) enables the user to define Series 1000 cards/keys authorization
parameters, including Fuel and Limit rules settings. This page is displayed only in cases where the
Series 1000 upgrade option on Page 4 was selected.
Figure 4-20. SiteOmat Setup Wizard, Page 10
Proceed as follows:
1. Enter the Series 1000 station System ID. This parameter serves as Fleet Code for all Series
1000 devices added to the database. The PIN Key is currently not applicable.
2. Edit the Limit Cut Off Quantity column in the Product Limit Table: Enter the fuel
quantity allowed per transaction to match Series 1000 Limitation Codes. These constitute a
single Limit Rule added to the database and applied to the Fleet devices
3. Edit the Product Authorization Table, selecting the Allowed Product Code drop-down
lists which contain the product codes defined on Page 5. Select all products permitted (each
row in the table defines a specific code) to match Series 1000 definitions. These constitute a
single Fuel Rule added to the database and applied to the Fleet devices
4. Click Next to continue