Gasboy SiteOmat Maintenance Manual - Manual (Page 117)

113 SiteOmat Setup and Maintenance Manual – MDE 4817G
changes
d. Enable manual totalizers: Select this checkbox to
manually enter mechanic pump totalizers. Please refer to
Section 6-7. of MDE 4818.
e. Card number automatically generated: Select this
checkbox to enable Card Numbers generation for not burned
devices. The vehicle is identified by its plate number and
automatically receives a device number after the first
refueling
f. Allow auto authorize pump from OrPT: Select this
checkbox to allow Shift Managers to switch the pump
operation modes from Need Authorize to Auto-Authorize
mode through ORPT
g. Record Fuel Start Flow Time: Select this checkbox to
include in transaction record the time stamp when the pump
started to supply fuel, namely changed to IN_USE state
TLG Update Intervals
Sets the intervals for receiving Delivery, Inventory and Alarm
updates from the TLG system.
Enclosure door open
detection
See paragraph 6-3.1
Discovery Mode
Activates/deactivates automatic recognition of Series 1000 devices.
The system authorizes Series 1000 cards/keys on the first fueling,
identifying rules and limits and adds the device to SiteOmat's
database.
OrPT Beeps
Provides sound feedback each time a device is detected. Select the
Allow beeps
checkbox to activate the feature and enter the required
# of beeps
. In cases where more than one OrPT is installed at the
station, it is required to associate the dispenser to a specific OrPT
terminal (please refer to paragraph 7-11)
Status Screen Beeps
Provides sound feedback on Status Screen each time a nozzle is
lifted. Select the Allow beeps checkbox to activate the feature and
enter the required # of beeps
Activate Manager Tag
Reactivates the Manager Screen on the OrPT, which enables the
technician to perform test transactions with the Manager Tag
provided with OrTOP controllers. After disabling this feature from
OrPT screen, the system cleans all test transactions, initializes all
counters in the database and deactivates the Test Transaction
option. Manager Tag option is enabled by default when Manager
Screen is active