Gasboy SiteOmat Maintenance Manual - Manual (Page 81)

77 SiteOmat Setup and Maintenance Manual – MDE 4817G
4-4.8. Page 8 – Payment
In this page (Figure 4-17), the user can set the SiteOmat connection to a third party clearing system.
Figure 4-17. SiteOmat Setup Wizard, Page 8
Set the various parameters described in Table 4-1 and click Next to continue
Table 4-1. Payment Clearing System Parameters
Credit Processor
Payment processor in use, selected from the drop-down list
PAIS IP & Port
IP address and port for communication between the internal
payment application and the Controller (for view only)
Tasks
Number of tasks to be simultaneously handled by the processor
(namely, the number of payment terminals in use in the station)
App Log
Enables application logging. Select the Enable checkbox and
enter the destination Port
Comm Log
Enables Controller – Processor communication logging. Select
the Enable checkbox and enter the destination Port
Timeout
Defines the waiting time for response from the processor
Card may not be reused
Prevents refueling with the same bank card within the selected