Gasboy SiteOmat Maintenance Manual - Manual (Page 205)

201 SiteOmat Setup and Maintenance Manual – MDE 4817G
8-4.5.10.1.9. Shift Close
[2013-02-18 09:13:54.135] <01605729> DEBUG [FCC.shift] <30019> Closing shift ###AUTO_EOD###...
[2013-02-18 09:13:54.599] <01605729> DEBUG [FCC.shift] <30021> Close shift: creating receipts for
shift 300000002 ...
[2013-02-18 09:13:54.817] <01605729> DEBUG [FCC.shift] <30022> Close shift: receipts for shift
300000002 created
[2013-02-18 09:13:54.817] <01605729> DEBUG [FCC.shift] <30025> Close shift: closing shift
300000002 ...
[2013-02-18 09:13:54.882] <01605729> DEBUG [FCC.shift] <30003> Create Totalizers For Shift ID =
300000002 (3 pumps)
[2013-02-18 09:13:54.883] <01605729> DEBUG [FCC.shift] <30004> Open/Close shift: pump
ID=200000011
[2013-02-18 09:13:54.883] <01605729> DEBUG [FCC.shift] <30005> Open/Close shift: pump
ID=200000011 name=1
[2013-02-18 09:13:54.883] <01605729> ERROR [FCC.shift] <30006> ERROR: can't read totalizers from
pump 1 - process is (0) should be 1 status is (55) should be (49)
[2013-02-18 09:13:54.884] <01605729> DEBUG [FCC.shift] <30004> Open/Close shift: pump
ID=200000012
[2013-02-18 09:13:54.884] <01605729> DEBUG [FCC.shift] <30005> Open/Close shift: pump
ID=200000012 name=2
[2013-02-18 09:13:54.885] <01605729> ERROR [FCC.shift] <30006> ERROR: can't read totalizers from
pump 2 - process is (0) should be 1 status is (55) should be (49)
[2013-02-18 09:13:54.885] <01605729> DEBUG [FCC.shift] <30004> Open/Close shift: pump
ID=200000013
[2013-02-18 09:13:54.885] <01605729> DEBUG [FCC.shift] <30005> Open/Close shift: pump
ID=200000013 name=3
[2013-02-18 09:13:54.887] <01605729> ERROR [FCC.shift] <30006> ERROR: can't read totalizers from
pump 3 - process is (0) should be 1 status is (55) should be (49)
[2013-02-18 09:13:55.527] <04587789> DEBUG [FCC.fueling] <20096> fccXMLParser StatusRequest
success.
[2013-02-18 09:13:55.528] <04587789> DEBUG [FCC.fueling] <20099> Ashrait: PAIS result (0): Status
(All Ok)
[2013-02-18 09:13:55.528] <04587789> ERROR [FCC.fueling] <20501> FCC: set bPAISDead=0
[2013-02-18 09:14:12.427] <01605729> ERROR [FCC.shift] <30013> Shift: Failed to read tank
inventory Tank_1
[2013-02-18 09:14:17.974] <01605729> ERROR [FCC.shift] <30013> Shift: Failed to read tank
inventory Tank_3
[2013-02-18 09:14:26.063] <01605729> ERROR [FCC.shift] <30013> Shift: Failed to read tank
inventory Tank_4
[2013-02-18 09:14:28.167] <04473094> INFO [FCC.fueling] <20060> MITAGVD ORTR (ID=200000004)
Punished
[2013-02-18 09:14:30.381] <01605729> ERROR [FCC.shift] <30013> Shift: Failed to read tank
inventory Tank_2
[2013-02-18 09:14:30.549] <01605729> DEBUG [FCC.shift] <30027> Close shift: check for
'unexpected' alarms in shift 300000002 ...
[2013-02-18 09:14:30.673] <01605729> DEBUG [FCC.shift] <30028> Close shift: finished shift
###AUTO_EOD### (with ID = 300000002)
8-4.5.10.1.10. Reading Totalizers
FIX – examples have to many pumps / nozzles – cut it
[2007-12-05 15:47:37.394 00005504] Create Totalizers For Shift ID = 300000005 (12 pumps)
[2007-12-05 15:47:37.394 00005504] Open/Close shift: pump ID=200000012
[2007-12-05 15:47:37.394 00005504] Open/Close shift: pump ID=200000012 name=1
[2007-12-05 15:47:37.441 00005504] Open/Close shift: pump ID=200000013
[2007-12-05 15:47:37.441 00005504] Open/Close shift: pump ID=200000013 name=2
[2007-12-05 15:47:37.441 00005504] Open/Close shift: pump ID=200000014
[2007-12-05 15:47:37.441 00005504] Open/Close shift: pump ID=200000014 name=3
[2007-12-05 15:47:37.457 00005504] Open/Close shift: pump ID=200000015
[2007-12-05 15:47:37.457 00005504] Open/Close shift: pump ID=200000015 name=4
[2007-12-05 15:47:37.457 00005504] Open/Close shift: pump ID=200000016
[2007-12-05 15:47:37.660 00001728] 1(1): Totalizer 1: Volume= 84835.710 Sales=145730.920
8-4.5.10.1.11. Print Shift Report (After Shift Close)
[2007-12-05 15:46:59.207 00005296] Close shift: creating receipts for shift 300000004 ...
[2007-12-05 15:46:59.332 00005296] Close shift: receipts for shift 300000004 created