Gasboy SiteOmat Maintenance Manual - Manual (Page 140)

136
SiteOmat Setup and Maintenance Manual – MDE 4817G
Figure 7-6. OrPT Features Dialog Box
Select the Work Mode from the drop-down list. For Home Base Stations, select the Home Base
(Extended)
option. By selecting this option the flow in the OrPT is configured for common home
base stations behavior.
The Home Base (Basic) option has fewer capabilities and is less recommended.
The Full Service option supports additional retail behavior, including attendants' shifts, dry item
sale, etc.
Next select a Printer that the OrPT uses for printing receipts (select the name of the pump printer
already defined in the Printers screen).
The Warehouse field is not relevant for Home Base Stations application.
7-5.3. Finalizing
Once all the parameters have been defined, proceed as follows:
1. Click Modify to enter the selections and return to the OrPT dialog box
2. Click New or Modify (for update procedure) to enter the selections in the OrPT list
3. In the OrPT dialog box, click Close to return to the Setup screen