Gasboy SiteOmat Maintenance Manual - Manual (Page 131)

127 SiteOmat Setup and Maintenance Manual – MDE 4817G
The Target of the Backup can be an FTP server or a Path.
If the FTP or HTTP option is selected, identify the URL and the Port. Also, the user Password
should be entered.
If a Path is selected, enter its identification.
To test the backup, click on the Backup Now button. This procedure performs an immediate, full
backup to the defined target. A binary file is created in the FTP server; in cases where using the
delta mode, TXT files are created. Those files can be accessed in the restore process only (see
section 8-3), do not open them with other applications.
NOTE
Prior to the Backup Now procedure, click on the
Save
button to save the settings.
Otherwise, a warning message is displayed (see Figure 6-10). Click OK to save the settings.
Figure 6-10. Save Data Message
6-8. SERIES 1000
The Series 1000 button opens the Series 1000 Upgrade pages of the Setup Wizard, enabling the user
to define Series 1000 cards/keys authorization parameters, in cases where SiteOmat replaces the
Series 1000 legacy system.
Please refer to paragraphs 4-4.10 and 4-4.11.