Gasboy SiteOmat Maintenance Manual - Manual (Page 168)

164
SiteOmat Setup and Maintenance Manual – MDE 4817G
Figure 7-27. Setup Pump Settings (more) Dialog Box
Table 7-10 Setup Pump Settings (more) Sections
Section Description
Grade Type
Sets the station level of service (Single or Multiple)
Nozzle State for
Authorization
Policy
Defines the nozzle state for authorization. This parameter selection must
match the fueling Method defined in the main Dispensers screen. The
default (Must always be lifted before authorization) should not be changed
for common dispensers.
Price Update
Policy
Allows defining when a new price is set at the pump. These selections are:
• Do not allow fuelling if the price update did not succeed, as soon as
the new price is entered or after a number of retries for the update
that failed. Accordingly, set the Number of retries.
• Update the price if the Price Per Volume (PPV) in the current