Gasboy SiteOmat Maintenance Manual - Manual (Page 87)

83 SiteOmat Setup and Maintenance Manual – MDE 4817G
4-4.12. Page 12 – Backup
In this page, select the backup mechanism for the SiteOmat database. (See Figure 4-22). SiteOmat
backup is only done through ftp. Contact the network administrator if backup is necessary.
Proceed as follows:
Figure 4-22. SiteOmat Setup Wizard, Page 12
1. Enable backup by selecting the Enable automatic backup of database checkbox
2. Select the Time of Backup for the following backup modes:
a. Incremental backup: Saves the changes made from the last backup. If the Enable
automatic backup of database
checkbox is selected, the system creates a delta or
incremental backup at the intervals determined in the Time of day for incremental
backup
drop-downs
b. Full backup: Saves the entire database. Full backup can be defined on a Weekly or
Monthly
basis by selecting the corresponding radio buttons. In both cases the backup
day is selected from the drop-down lists
3. Enter Backup Target properties: FTP server location – URL and the Port, the User and
the Password