Gasboy SiteOmat Maintenance Manual - Manual (Page 126)

122
SiteOmat Setup and Maintenance Manual – MDE 4817G
6-5. ALARMS
Click on the Alarms button to display the Alarms setup screen (see Figure 6-7), which enables users
to define the alarm attributes. The types of alarms are predetermined in the system, and they are
listed in the Alarm Code column by ascending number. The administrator can only change their
attributes.
To change an alarm attributes, first select the alarm by clicking on the corresponding row. The
selected alarm attributes are shown in the selection boxes (along with its name in the left box). Set
the attributes from drop-down lists:
• Priority: Select from Journal to Urgent (5 selections)
• Enable: Yes or No (for Disable an alarm), and
• Audio: Select from No Audio to Attention (6 selections)
Click Update to enter the selections. Verify that the new attributes are displayed in the alarm’s
corresponding row.
Click Close to exit the dialog box and return to the Station Parameters screen.
Figure 6-7. Alarm Management Dialog Box