Gasboy SiteOmat Maintenance Manual - Manual (Page 46)

42 SiteOmat Setup and Maintenance Manual – MDE 4817G
g. Set the Controller and wait for synchronization success in the station
status row (it may take a few minutes)
h. Set fleets and devices
2-7. BYPASS FEATURE FOR MECHANICAL PUMPS
Site Controllers configuration for mechanical pumps include bypass switches – a switch per
dispenser (apart from TopKat PLUS which requires adding an external bypass switch, P/N
813104450 to the existing distribution board). These should be used in cases of system malfunction
to enable refueling. The switch is connected to Line (high voltage cable) and to the controller (low
voltage wires) so as to provide indication on bypass state.
While the system is in Bypass state, SiteOmat keeps capturing the total dispensed from the pumps
and generates an event displayed in Event Viewer screen.