AMETEK Lx Series II Programming Manual - Manual (Page 39)

Programming Manual Lx \ Ls Series II
35
4. SCPI Command Reference
4.1 Introduction
This chapter provides a complete listing of all SCPI commands supported by the Lx\Ls Series of
AC sources. Commands are grouped by function according the root level commands. Some
general command related issues are:
Phases
If a command can apply to ind ividual phases of an AC source, the entry “Phase Selectable” will
appear in the command description.
Related Commands
Where appropriate, related commands or queries are included. These are listed because they are
either directly related by function, or because reading about them will clarify or enhance your
understanding of the original command or query.
This chapter is organized as follows:
Subsystem commands, arranged by subsystem
IEEE 488.2 common commands