AMETEK Lx Series II Programming Manual - Manual (Page 175)

Programming Manual Lx \ Ls Series II
171
HEADER EXTENSION ARGUMENT DEFINITION
GPIB GET message.
VAL From parameter
minimum to
maximum value Final ramp or step value in volts, hertz,
amps, degrees, sine wave or square wave.
WVF A, B, C SNW, SQW Waveform
OPN Open output relays
CLS Close output relays
VLT A, B, C Used with TLK to request measurement of
the output voltage
ELT Used with TLK to request total
accumulated run time.
CUR A, B, C Used with TLK to request measurement of
the output load current.
PWR A, B, C Used with TLK to request measurement of
the real output power.
APW A, B, C Used with TLK to request measurement of
the apparent output power.
PWF A, B, C Used with TLK to request measurement of
the output power factor.
PZM A, B, C Used with TLK to request measurement of
the output phase angle.
FQM Used with TLK to request measurement of
the output frequency.
Table 8-3: APE language syntax program headers