AMETEK Lx Series II Programming Manual - Manual (Page 205)

Programming Manual Lx \ Ls Series II
201
MIL704:ABNormal:FREQuency:OVER
This command will set the high frequency level for the abnormal state operation.
Command Syntax MIL704:ABNormal:FREQuency:OVER]
Parameters none
Examples MIL704:ABN:FREQ:OVER
Query Syntax none
8.6.6 MIL704 Emergeny State Commands
MIL704:EMERgency:VOLTage
This command will set the voltage level for the emergency state operation.
Command Syntax MIL704:EMERgency:VOLTage
Parameters none
Examples MIL704:EMER:VOLT
Query Syntax none
MIL704:EMERgency:FREQuency
This command will set the frequency level for the emergency state operation.
Command Syntax MIL704:EMERgency:FREQuency
Parameters none
Examples MIL704:EMER:FREQ
Query Syntax none