AMETEK Lx Series II Programming Manual - Manual (Page 211)

Programming Manual Lx \ Ls Series II
207
MS704:TEST:CONDition
This command sets the desired test conditions that apply to the EUT being test. The operating
condition for the EUT determines the severity of the immunity tests applied. Available test
conditions are defined by the letters A through Z or AA to ZZ.
Note that parameters AA to ZZ are only valid if the test group selected has more than 26 test
conditions (A..Z). For tests that show tests conditions starting at AA, use A to select the first the
first test condition, not AA.
Command Syntax MS704:TEST:CONDition
Parameters A | .. | Z | AA | .. | ZZ
Examples MS704:TEST:COND A
Query Syntax MS704:TEST:COND?
Returned Parameters