RED ONE OPERATION GUIDE User Manual

Page 91

Build 31 v31.6.16

NOVEMBER 28, 2011

To enable/disable a test signal check the box and select the desired test signal to display. Available test

signals include the following:

1. To set test pattern, push in or down on joystick to

place checkmark in TEST SIGNAL checkbox.

2. TEST SIGNAL box will highlight.

3. Twist joystick to change the highlighted TEST SIG-

NAL box to the desired setting.

Move joystick left, right, up or push in to select.

SMPTE BARS

BLACK FIELD

WHITE FIELD

LUMA RAMP

CHROMA RAMP

CHIP CHART

FOCUS PATTERN

NOTE: The RED ONE test signals are not recordable, they are provided to help align external video

monitors connected via the HD-SDI or HDMI outputs.