RED ONE OPERATION GUIDE User Manual

Page 158

Text mode
Original mode

Build 31 v31.6.16

NOVEMBER 28, 2011

157

Error Message: Black Shading - Calibration Failed – Exit Magnify Mode and Try Again.
If the camera is in Magnify mode when attempting to perform a Black Shading Calibration, the following

error will be displayed:

Select OK and exit Magnify mode. Attempt Black Shading again.
Error Message: Black Shading – Unable to Calibrate.
If a formatted CF card or REDMAG is not installed in the camera when attempting to perform a Black

Shading Calibration, the following error will be displayed:

Connect formatted CF card or REDMAG to the camera and perform the Black Shading Calibration again.