RED ONE OPERATION GUIDE - Manual (Page 56)

Build 31 v31.6.16
NOVEMBER 28, 2011
© 2007-2011 RED.COM INC.
55
GREEN GAIN
Adjusts the gain of the GREEN channel only. Range is 0.0 (no Green) to 2.0. Default is 1.0.
TONE
The TONE sub-menu allows a Tonal Response Curve to be overlaid on the video monitor path. The curves
parameter values are stored in metadata, and may be visualized in REDCINE-X Post-production software
as Curve data.
CURVE
This checkbox enables the Tonal Response Curve. Default setting is enabled.
To select: use joystick to
highlight ENABLE checkbox and push in or down on joystick to place checkmark in CURVE checkbox.
DEFINE
Selects the curve control point to be adjusted -
Black, Toe, Center, Knee or White. Each control point
comprises two independent values, one each for X and Y-axis locations.
TOE X
Adjusts the location of a control point along the X-axis on the tonal response curve. Label will change
based on DEFINE selection. Default setting is 25.