Record indicator, Recording errors – RED ONE OPERATION GUIDE User Manual

Page 13

Build 31 v31.6.16

NOVEMBER 28, 2011

• Enabling first / disabling last audio channel
• Entering and exiting MAGNIFY (Image Zoom)

RECORD INDICATOR

When recording, the RED ONE camera provides a variety of record indications (tallies):

Timecode, normally displayed in white colored text, will turn Red

A small Red dot will appear in the top left corner of any video monitoring outputs (RED LCD, etc…)

The REC LED on the rear of the camera will turn Red

If using an EVF, the LED on the front will turn Red when the Tally is set to TALENT. Refer to SYSTEM

MENU CONTROL > SETUP > PROGRAM>

RECORDING ERRORS

RECORD ERROR: NO_DIGIMAG: is displayed if media is not present for recording. Connect media to

camera. Refer to

for detailed information.

RECORD ERROR: INCOMPATIBLE_DIGIMAG: is displayed if media is not set up properly. Reformat

media as necessary. Refer to

under APPENDIX B: MANAGING DIGITAL MEDIA for

detailed information and instructions.