Custom (previously program), Look around, Cursors – RED ONE OPERATION GUIDE User Manual

Page 88

Build 31 v31.6.16

NOVEMBER 28, 2011

CUSTOM (PREVIOUSLY PROGRAM)
Custom allows the use to program the specific PROTECT areas to be used.

Select CUSTOM to access the CUSTOM sub menu.

LOOK AROUND
LOOK AROUND allows the OPACITY of the LOOK AROUND area to be set to 0%, 50% and 100%. De-

fault value is 50%.

CURSORS
Enables / disables image cursors. Select

Cursors to enable Center, Safe Action or Safe Title cursors.

CENTER: Enables / disables image center cursor. Check or uncheck to select. Default is checked.

ACTION: Enables / disables outer guides. Style may be specified as a corner marker or a rectangle. De-

fault is checked with CORNERS selected.