Appendix c: saving look / user profile, Look, Export look – RED ONE OPERATION GUIDE User Manual

Page 127: Appen, Dix c: saving look, Appendix c: saving look

Build 31 v31.6.16

NOVEMBER 28, 2011

126

APPENDIX C: SAVING LOOK / USER PROFILE

The following information lists the specific camera information stored when saving a LOOK or USER

PROFILE file. Before attempting to EXPORT data, ensure that an SD card is inserted into the slot at the

right front of the camera. LOOK and USER PROFILE information can easily be shared between cameras

by IMPORTING data from the SD Card.
NOTE: LOOK files may also be created by REDCINE-X. Refer to the REDCINE-X OPERATIONS

GUIDE.

LOOK

EXPORT LOOK

To export LOOK information, perform the following:
1. Press the VIDEO menu button on the rear of the camera.
2. Select VIDEO menu.
3. Select LOOK menu.
4. Select EXPORT.
5. External monitors and camera LCD will confirm profile was exported successfully. External monitors

will display filename for profile with the extension “.RLK”.

6. Press Joystick once to acknowledge and clear the "export successful" confirmation message.

NOTE: You may edit LOOK filenames on a computer, but do not change its extension (.RLK) or the

camera will not recognize it. It is recommended that you restrict file names to 12 characters as the
camera cannot display the last 4 characters of a 16 character name.
NOTE: If a SD Card is not inserted into the slot at front left of camera, camera will display: