Enable 2 – RED ONE OPERATION GUIDE User Manual
Page 69
Build 31 v31.6.16
© 2007-2011 RED.COM INC.
NOVEMBER 28, 2011
68
68
To adjust LO IRE: Select LO IRE and twist joystick to change the LOWER IRE: box to the desired setting
between 0 and 84 (default is 44).
To adjust HI IRE: Select HI IRE and twist joystick to change the UPPER IRE: box to the desired setting
between 1 and 93 (default is 47).
ENABLE 2
By selecting this checkbox, settings under CONFIGURE 2 are used. To select: Highlight and push in or
down on joystick to place checkmark in ENABLE 2 checkbox. Default is Disabled.
Areas of the image exposed within these ranges will be indicated by crosshatched overlays. Zebra 2 is
displayed in the image below.