Restore – RED ONE OPERATION GUIDE User Manual
Page 105
Build 31 v31.6.16
© 2007-2011 RED.COM INC.
NOVEMBER 28, 2011
104
104
6. As the last step in the process the camera will display:
7. Installation of the new data takes about 3 minutes. The camera will confirm process is complete:
8. Select OK and restart the camera as instructed.
RESTORE
Restore
will reset any user defined black shading data to factory default values.
1. Select BLACK SHADING, camera monitoring outputs will display:
2. Select RESTORE, camera monitoring outputs will display:
3. Select OK, camera monitoring outputs will display: