RED REDLINK™ DEVELOPMENT KIT LAUNCH SEQUENCE - Manual

REDLINK DEVELOPMENT KIT LAUNCH SEQUENCE
COPYRIGHT © 2014 RED.COM, INC 845-0020, REV-B
ACCESS SDK AND SAMPLE APPS
Download the REDLINK TM SDK, sample apps,
and resources from the included USB
flash drive.
Check for the most recent version of the
REDLINK
TM SDK and other resources at
https://developer.red.com .
CREATE YOUR APP
Review the sample Android TM , iOS ® , and
Windows ® apps; you can use these as
templates for your app.
Use the REDLINK TM SDK and resources to
create a DSMC ® control app for your mobile
device or computer.
Use the development tools of your choice.
Load your app to a test platform so that you
can run the app on your device.
USE YOUR APP
Dock the REDLINK TM Bridge to the back of the
DSMC ® or compatible rear module.
In the DSMC ® menu, go to Settings > Setup
> Communication > WiFi. Either connect the
REDLINK
TM Bridge to the same wireless network
that your device is connected to, or create an
ad hoc network with the REDLINK
TM Bridge and
connect your device to that network.
Use your custom app to control the DSMC ® .