Playback, Back focus – RED ONE OPERATION GUIDE User Manual

Page 36

Build 31 v31.6.16

NOVEMBER 28, 2011

Digital media should be treated with equal care as exposed film or a videotape master. We recommend

storing digital media that contains your footage in a secure location and backing up the data on another

digital media, such as data tape or a hard disk drive.
Each clip is recorded to the digital media in a separate folder and with a unique clip name. To copy the

clip from the digital media to a Macintosh or Windows computer, just drag and drop its folder to the com-

puter’s storage device. If you open the Clip folder, it will look like this:

The Clip folders (.RDC) are held in a root directory (.RDM) on the digital magazine. In each folder there will

be one or more REDCODE RAW data files (.R3D) containing RAW sensor data, plus audio and metadata,

and four QuickTime reference movies, which allows a QuickTime Player to display the RAW data at _F full,

_H high, _M medium or _P proxy resolutions.
Double click on one of the QuickTime reference movies to see a preview of the .R3D file. Playback frame

rate will depend on the processor speed of your computer. If the frame rate is too low, select a smaller

QuickTime movie.
NOTE: To operate with QuickTime under Macintosh OSX, install the supplied REDCODE RAW plug-

in available at

www.RED.com/support.

Windows is not currently supported.

PLAYBACK

Playback of recorded clips is available on-camera using the buttons located above the LCD display. Refer

to CAMERA CONTROLS, CONNECTORS AND DISPLAY > CAMERA CONTROLS >

REAR OF CAMERA

for complete information.