Evf menu – RED ONE OPERATION GUIDE User Manual

Page 100

Build 31 v31.6.16

NOVEMBER 28, 2011

EVF MENU
When checked, activates the rotary switch on the EVF and displays a Gray “OFF” box on left side of EVF

and all external monitors. Unchecked by default.
NOTE: Interaction with the EVF MENU is not supported with the BOMB EVF. If check marked, the

UI will only indicate OFF.

Activating this feature allows adjustment of the following parameters directly using the rotary switch:

DAR:

Adjusts Dark Detail to view addition information (detail) in dark areas of a sce-

ne, or in dimly illuminated nighttime scenes

CH1:

Adjusts Ch 1 microphone audio level

CH2:

Adjusts Ch 2 microphone audio level

SHU:

Adjusts Shutter speed

VAR:

Adjusts Varispeed frame rate

ISO:

Adjusts Sensitivity rating of monitoring

OFF:

EVF control – Active / Disabled

To use the rotary switch to make adjustments:
1. Push the rotary switch once.
2. Rotate the rotary switch until the white selection box overlays the parameter you wish to adjust.
3. Push the switch to lock that selection in.
4. Rotating clockwise increases the parameter value, counterclockwise decreases the parameter value.
5. Push the switch once more to lock the parameter and exit the parameter adjust mode.