Look, Clear, Import – RED ONE OPERATION GUIDE User Manual

Page 53

Build 31 v31.6.16

NOVEMBER 28, 2011

LOOK

The LOOK menu permits Video, Gain and Tone values to be exported or imported from an SD Card. Look

files may be read by another camera, and may be created by the camera or the REDCINE-X application.

Push joystick down or in to select desired change.
NOTE: LOOK (.RLK) files created in Build 30 or higher are not compatible with Build 21 or earlier.

CLEAR
Resets the settings for Color, Gain and Tone menu parameters to their default values. When selected,

camera will display “SUCCESSFULLY RESTORED SETTINGS ‘look’ settings restored to Factory Default

Values. Select OK.

IMPORT
The current settings for Color and Gain parameters will be overwritten by the values stored on the SD

Card. The available LOOK files will be listed in alphabetical order, e.g.
• PROFILE_0
• PROFILE_1
• MAGENTA_TINT

To adjust: When IMPORT is selected, the LOOK PROFILE box will be highlighted. Twist joystick like a

knob to select, push joystick down or in to set.
NOTE: If no profiles are available, NONE AVAILABLE will be displayed in the LOOK PROFILE box.
NOTE: LOOK profile can be imported from REDCINE-X to the camera. Refer to REDCINE-X Opera-

tion Guide for complete information.