Procedure a, Procedure b – RED ONE OPERATION GUIDE User Manual

Page 124

Build 31 v31.6.16

NOVEMBER 28, 2011

123

NOTE: The camera will respond to physical removal of the media without un-mounting and display

the following warning:

UNMOUNTING of digital media can be performed in one of two ways:

PROCEDURE A

1. Push and hold the UNDO button.
2. While holding the UNDO button, push the EXIT button.
3. Camera LCD will display MEDIA X and the lower left corner of the external monitor will display “SAFE

TO REMOVE” in Red text. The White text with the counter and media name at the bottom edge of the

display will disappear. You may now remove the CF, REDMAG or disconnect the RED-DRIVE or RED-

RAM safely.

NOTE: The camera will display this message until media is removed or disconnected. Once media

is removed or disconnected, the camera LCD will display NO DIGMAG and the lower left corner of

the external monitor will display NONE ATTACHED in Red text until media is inserted.

PROCEDURE B

1. Push the SYSTEM button.
2. Select MEDIA, push joystick down or in to enter.

3. Select UNMOUNT, push joystick down or in to enter.