Connecting media – RED ONE OPERATION GUIDE User Manual
Page 33
Build 31 v31.6.16
© 2007-2011 RED.COM INC.
NOVEMBER 28, 2011
32
32
CONNECTING MEDIA
Insert the CF card with the manufacturer’s label facing outward (away from camera body). Push the CF
firmly into the CF slot, but without using excessive force to prevent damage.
Or insert the REDMAG with RED facing outward (away from camera body). Push the REDMAG firmly into
the Side SSD slot, but without using excessive force to prevent damage.
Or attach a RED-DRIVE or RED-RAM magazine to the
(e-SATA port) located on the rear
of the camera using the 16-pin e-SATA cable provided.
Go to SYSTEM > MEDIA > FORMAT to format REDFLASH, REDMAG, RED-DRIVE or RED-RAM.
NOTE: Media not formatted to Build 31 may display as "INCOMPATIBLE". Media must be reformat-
ted to Build 31.
For additional information formatting media, refer to