RED ONE OPERATION GUIDE - Manual (Page 112)

Build 31 v31.6.16
NOVEMBER 28, 2011
© 2007-2011 RED.COM INC.
111
NOTE: When in Master / Slave the Slave camera will use the Master camera's I.D letter. So file
names will typically be: A001_L001_0906**.R3D and A001_R001_0906**.R3D respectively (where **
represent the two wildcard characters)
HD-SDI
Allows you to select between SMPTE (broadcast range) and FULL (full range) code values. Default setting
is FULL.
VIDEO
Allows you to select between NORMAL, FLIP H (Horizontal), FLIP V (Vertical), and FLIP H+V monitor path
video orientation. Default setting is NORMAL.
Flipping the monitor path video maybe desirable when working with 3D beam splitter rigs, or when the
camera is mounted inverted on a crane.
IMPORTANT: When set to FLIP V or FLIP H+V, the output signal on HD-SDI will be have a one (1)
frame delay.
NORMAL
Displays the live or playback image in normal orientation.