Verify current camera firmware, Upgrade procedure – RED ONE OPERATION GUIDE User Manual

Page 116

Build 31 v31.6.16

NOVEMBER 28, 2011

115

VERIFY CURRENT CAMERA FIRMWARE

There are 2 ways to verify the current level of firmware installed on the camera.
A. During camera boot up when turned on, the current firmware version will be displayed on the cam-

era’s LCD, RED EVF, RED LCD and all external monitors.

B. With the camera ON, press and hold the UNDO button, then press in on the joystick. The camera’s

unique PIN and current firmware version will be displayed on the camera’s LCD.

UPGRADE PROCEDURE

NOTE: MYSTERIUM sensor based cameras may not be downgraded to firmware prior to Build 16,
MYSTERIUM X sensor based cameras, prior to Build 30.
1. To download the latest firmware (Build), go to

www.RED.com/support.

2. Click on the desired build link and download to your desktop or directory of your choosing.
NOTE: Before the download starts you will be prompted to enter your account and password or the

camera’s P.I.N.