RED ONE OPERATION GUIDE - Manual (Page 121)

Build 31 v31.6.16
© 2007-2011 RED.COM INC. NOVEMBER 28, 2011
120 120
2. When a CF card or REDMAG is inserted into the camera or a RED-DRIVE or RED-RAM magazine is
connected, the camera will recognize the media is unformatted and display “DISK UNFORMATTED” in
the LCD display and the lower left corner of the external monitors will display “UNFORMATTED”.
3. To format the media push the SYSTEM menu button.
4. Select MEDIA and press Joystick in or down to enter. Camera LCD will display MEDIA Menu.
5. Select FORMAT and press Joystick in or down to enter. Camera LCD will display MAGAZINE FOR-
MAT.
-
If the media IS blank, camera LCD will display “FORMATTING…” and all external monitors will
display:
-
If the media IS NOT blank, refer to RE-FORMATTING MEDIA .
NOTE: If when selecting FORMAT, the display indicates FORMAT FAILED, refer to MEDIA ERRORS .
6. Once formatting is completed the camera LCD will display “FORMAT DONE” and all external monitors
will display:
7. Press Joystick in or down to select OK. Camera will return to normal operation.