Configure, Resolution – RED ONE OPERATION GUIDE User Manual
Page 80
Build 31 v31.6.16
NOVEMBER 28, 2011
© 2007-2011 RED.COM INC.
79
3. Move Joystick up to select and exit.
NOTE: For Master / Slave Configuration information refer to APPENDIX E: MASTER / SLAVE CAM-
ERA CONFIGURATION > CLIP NAMING CONVENTIONS >
CONFIGURE
Configure defines the operation of the camera in a project.
RESOLUTION
Choose 4.5K, 4K, 3K or 2K resolutions. Do not use 4.5K, 4K or 3K for S16mm/B4 lenses. Default resolu-
tion is 4K 2:1.
1. To set resolution, select RESOLUTION and press in or down on joystick.
2. Twist joystick to change the highlighted RESOLUTION box to the desired resolution.
3. Move Joystick right or up to select and exit.
The maximum available time base supported by each media type for each resolution is:
REDCODE 28
REDFLASH 8GB
REDFLASH 16GB
RED-DRIVE
RED-RAM
REDMAG
2K 2:1
60 fps
60 fps
60 fps
60 fps
2K 16:9
60 fps
60 fps
60 fps
60 fps
2K ANA
60 fps
60 fps
60 fps
60 fps
3K 2:1
50 fps
60 fps
60 fps
60 fps
3K 16:9
30 fps
50 fps
50 fps
50 fps
3K ANA
60 fps
60 fps
60 fps
60 fps
4K 2:1
25 fps
30 fps
30 fps
30 fps
4K HD
25 fps
30 fps
30 fps
30 fps
4K 16:9
25 fps
30 fps
30 fps
30 fps
4K ANA
30 fps
30 fps
30 fps
30 fps
4.5K WS
25 fps
30 fps
30 fps
30 fps