Reset, Project – RED ONE OPERATION GUIDE User Manual

Page 77

Build 31 v31.6.16

NOVEMBER 28, 2011

3. Move Joystick to the left and select FORMAT. If the magazine is not empty, a warning and confor-

mation screen will appear, push FORMAT or CANCEL as appropriate.

RESET

Select this function if you wish to reset the reel number counter used by the camera to allocate reel num-

bers when the media is formatted.
NOTE: To protect against duplicate magazine and file names, the camera inserts a random two
digit alphanumeric number in the file and/or directory names.

1. Select REEL# and press in or down on joystick.
2. Twist joystick to change the highlighted RESET # box reel number between 1 and 999.
NOTE: The default reel number offered by the camera will be 1. The camera no longer resets this

value each time the Project Time Base (formerly Frame Rate) is changed.

3. Move Joystick to the left and select FORMAT. If the magazine is not empty, a warning and confor-

mation screen will appear, push FORMAT or CANCEL as appropriate. For additional information, go to

APPENDIX B: MANAGING DIGITAL MEDIA

PROJECT

The project menu sets the operating parameters the camera will use for a given project. Options available

are STATUS, SLATE, CONFIGURE, TIMECODE, and QT PROXIES.