RED ONE OPERATION GUIDE - Manual (Page 71)

Build 31 v31.6.16
© 2007-2011 RED.COM INC. NOVEMBER 28, 2011
70 70
4. Move joystick left or right to select and exit.
LINE LEVEL INPUTS
Line Level audio inputs are designed to operate at unity gain (0dB), therefore use 0dB and set a 0dbu (-
20dBFS) line level output from the production mixer or other external signal source. Default value is 0dB.
+10dB: Select this value to normalize input levels when receiving a TAPE level line input (-10dB).
MICROPHONE LEVEL INPUTS
Choose an Input Level that aligns the input signal to the reference line drawn vertically through the cam-
era’s PPM, indicating 0dBu. This setting provides 18dB headroom above reference level before signal
clipping and the digital audio recording will be at maximum Signal to Noise ratio. Range is
+26dB to
+54dB. Default value is +36dB.
HEADPHONE
The sub menu provides controls for headphone output volume channel mixing.
1. Select desired setting.
2. VOLUME box will highlight to allow you to choose desired dB level.
3. Twist joystick to change the highlighted VOLUME box to the desired setting.
4. Move joystick left or right to select and exit.