Unmount, Format, Change – RED ONE OPERATION GUIDE User Manual

Page 76

Build 31 v31.6.16

NOVEMBER 28, 2011

NOTE: When using Pre-Record, the Edge Code written to the digital magazine can become discon-

tinuous between clips, however Timecode is unaffected.

UNMOUNT

Select to un-mount digital media from the RED ONE camera in a failsafe manner. The camera operating

system will ensure that all files are closed, hard disk heads (if present) are parked, and REDFLASH CF

card, REDMAG, RED-DRIVE or RED-RAM magazine is properly powered down. For detailed instructions,

go to

APPENDIX B: MANAGING DIGITAL MEDIA

FORMAT

Select to format digital media. The camera will warn that “all data will be erased”, and formatting require

that a sequence of confirm commands are made before proceeding. For detailed instructions, go to

AP-

PENDIX B: MANAGING DIGITAL MEDIA

CHANGE

Select this function if you wish to change the reel number allocated by the camera when media is format-

ted.

1. Select REEL# and press in or down on joystick.
2. Twist joystick to change the highlighted NEW # box reel number between 1 and 999.
NOTE: The default reel number offered by the camera will be the last used value the camera used
as the reel number - e.g. if the last used reel number was 56, the change number suggested by the

camera will also be 56.