Metrohm tiamo 2.3 Manual - Manual (Page 945)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 ￭￭￭￭￭￭￭￭ 929
Input 250 characters
Default value 'empty'
5.6.4 Measuring commands
5.6.4.1 Measuring commands - Overview
Menu item: Method ▶ Insert ▶ New command... ▶ Measure
Commands for measurements with different measured quantities.
The following measuring commands can be selected:
￭ MEAS pH
Potentiometric pH measurement with pH electrodes.
￭ MEAS U
Potentiometric voltage measurement with metal electrodes.
￭ MEAS Ipol
Amperometric measurement with selectable polarization voltage
(measured quantity current I).
￭ MEAS Upol
Voltametric measurement with selectable polarization current (meas-
ured quantity voltage U).
￭ MEAS T
Temperature measurement.
￭ MEAS T/Flow
Temperature and gas flow measurement.
￭ MEAS Conc
Concentration measurement (direct measurement).
￭ MEAS Cond
Conductivity measurement.
￭ MEAS TC Cond
Measurement of the temperature coefficient of the conductivity.
￭ MEAS Ref
Measurement of a reference solution with the spectrometer.
￭ MEAS Spec
Measurement of the sample solution
￭ MEAS Opt
Absorbance measurement
￭ MEAS Opt Conc
Measurement of standard solutions for the calibration of color
reagents.
￭ MEAS TMF
Measurement of a reference solution with the photometer.
￭ STDADD man
Standard addition with manual addition of the standard addition solu-
tion.