Metrohm tiamo 2.3 Manual - Manual (Page 1385)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 ￭￭￭￭￭￭￭￭ 1369
Monitoring the solution
on | off (Default value: off)
If this option is activated, then the working life of the solution will be
monitored.
Working life
Working life of the solution in days. If a value is entered here then the
Expiry date will be automatically adapted.
Range 0 ... 999 Days
Default value 999 Days
Expiry date
Expiry date of the solution. The date can be selected by pressing in the
dialog window Select date. After a date has been entered the Working
life will be automatically adapted.
Selection Date selection
Message
The message options can only be edited if monitoring is switched on.
Message by E-mail
on | off (Default value: off)
The message is additionally sent to the e-mail address defined under [E-
mail] if this option is activated. The message is sent in text format.
[E-mail]
[E-Mail] opens the Send E-mail window (see Chapter 2.6.1, page 92).
Acoustic signal
on | off (Default value: off)
If this option is activated, an acoustic signal will be emitted additionally to
the message defined above.
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the working life has expired then one
of the following actions will be triggered automatically at start test:
Selection Record message | Display message | Cancel
determination
Default value Display message