Metrohm tiamo 2.3 Manual - Manual (Page 1293)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 ￭￭￭￭￭￭￭￭ 1277
Track name
Selecting the track to be called. All the normal tracks defined in the
method can be selected (with the exception of the main track).
Selection 'Track name' | 'empty'
Default value 'empty'
Condition
on | off (Default value: off)
Expression for the condition(s) which can be created or edited with the
formula editor after pressing on or double-clicking in the text field
(see Chapter 2.4, page 29).
If this check box is activated, then the call will be carried out only if the
evaluation of the condition gives the result 1 (= true).
Input 1000 characters
Default value 'empty'
5.6.10.4 LOOP
5.6.10.4.1 LOOP - Overview
Dialog window: Method ▶ LOOP ▶ Properties.. ▶ LOOP - 'Command name'
Command for the repeated execution of a command sequence. The
loop can be terminated after fulfilling various stop criteria.
Appearance
The command has the following appearance:
A LOOP command just inserted has an arrow on the left-hand side with
which a loop can be created by using the mouse to drag this arrow to the
desired command in the same track. Two different types of loops will
result, depending on whether the arrow has been dragged upward or
downward:
Repeat loop While loop