Metrohm tiamo 2.3 Manual - Manual (Page 1578)

7.17 RS-232 device ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1562 ￭￭￭￭￭￭￭￭ tiamo 2.3
7.17 RS-232 device
7.17.1 RS-232 device - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties… ▶ Properties - 'De-
vice type' - 'Device name'
The parameters for a generic RS-232 device are set on the following
tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ RS-232
Selects and configures the serial interface the device is connected to.
￭ GLP
Information on GLP tests and GLP monitoring.
7.17.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
On the tab General, general properties of the device are displayed.
Device name
Designation of the device (can be freely defined by user).
Input 50 characters
Default value Device type number_#
Device type
Display of the device type.
Program version
Shows the program version of the device.
Only visible with devices that have their own firmware.
[Update]
Opens the dialog window Load new program version (see Chapter
7.1.6, page 1464).
This button is only displayed with devices that have their own firmware. It
is only active if the device has an old program version not supported by
tiamo and which can be updated by tiamo itself.
Device serial number
Shows the serial number of the device.