Metrohm tiamo 2.3 Manual - Manual (Page 1428)

6.8 Subwindow Colorimetric sensors ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1412 ￭￭￭￭￭￭￭￭ tiamo 2.3
Upper limit
Upper warning limit for the cell constant.
Range 0.001 ... 500 /cm
Default value 400 /cm
Intervention limits for cell constant (for conductivity sensors
only)
on | off (Default value: off)
If this option is activated, then the values for the cell constant will be
shown in red if the limits are exceeded.
Lower limit
Lower intervention limit for the cell constant.
Range 0.001 ... 500 /cm
Default value 0.001 /cm
Upper limit
Upper intervention limit for the cell constant.
Range 0.001 ... 500 /cm
Default value 500 /cm
6.8 Subwindow Colorimetric sensors
6.8.1 Colorimetric sensors - General
Subwindow: Configuration ▶ Colorimetric sensors
The subwindow Colorimetric sensors contains the data for colorimetric
sensors in tabular form. It can be displayed in the program part Configu-
ration as a component part of the Configuration view or (if not present
on the desktop) in a separate window with View
▶ Quick access. The
subwindow can be enlarged and reduced as required; it can also be maxi-
mized.
6.8.2 Table - Colorimetric sensors
6.8.2.1 Table - Colorimetric sensors
Subwindow: Configuration ▶ Colorimetric sensors
Contents
In the table the following information about the colorimetric sensors is
shown as standard: