Metrohm tiamo 2.3 Manual - Manual (Page 186)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
170 ￭￭￭￭￭￭￭￭ tiamo 2.3
Copy automatically into next line
Method
on | off (Default value: on)
If this option is activated, then the content of this field will automatically
be filled with the content of the previous line when a new sample data
line is created.
ID1 … ID3
on | off (Default value: on)
If this option is activated, then the content of this field will automatically
be filled with the content of the previous line when a new sample data
line is created.
ID4 … ID16
on | off (Default value: off)
If this option is activated, then the content of this field will automatically
be filled with the content of the previous line when a new sample data
line is created.
Sample size
on | off (Default value: off)
If this option is activated, then the content of this field will automatically
be filled with the content of the previous line when a new sample data
line is created.
Unit
on | off (Default value: on)
If this option is activated, then the content of this field will automatically
be filled with the content of the previous line when a new sample data
line is created.
Sample position + 1
on | off (Default value: on)
If this option is activated, then the content of this field will automatically
be incremented by +1 when a new sample data line is created.