Metrohm tiamo 2.3 Manual - Manual (Page 1367)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 ￭￭￭￭￭￭￭￭ 1351
Functions
The menu [Edit] beneath the filter table contains the following menu
items:
Edit line Open the dialog window Edit filter criterion %1, in which the filter condi-
tions of the line selected in the table can be edited (see Chapter 6.4.2.3.4.2,
page 1351).
Insert new line Insert a new empty line above the line selected in the table. The dialog window
Edit filter criterion opens automatically (see Chapter 6.4.2.3.4.2, page
1351).
Cut lines Transfer the selected lines to the clipboard.
Copy lines Copy the selected lines to the clipboard.
Paste lines Insert lines from the clipboard above the selected line.
Delete lines Delete the selected lines.
[Apply filter]
Apply the filter conditions to the Audit Trail table.
6.4.2.3.4.2 Special filter - Editing filter criterion
Dialog window: Audit Trail ▶ Filter ▶ Special filter... ▶ Special filter - Database
'ConfigDB' ▶ [Edit] ▶ Edit line ▶ Edit filter criterion %1
[Edit] ▶ Edit line is used to open the dialog window Edit filter crite-
rion %1 in which the filter condition selected in the filter table can be
edited.
Link
Selection of the type of link (logical operation) with the preceding filter
condition.
Selection AND | OR
Default value AND
Field
Selection of the field according to which the filtering is to be carried out.
Selection Last 10 selected fields
[More...]
Opens the dialog window Filter - Field selection in which all fields
according to which filtration can be performed are listed in the form of a
tree. A field can be applied in the filter condition by highlighting it and
closing the dialog window with [OK].