Metrohm tiamo 2.3 Manual - Manual (Page 1588)

7.18 Balances ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1572 ￭￭￭￭￭￭￭￭ tiamo 2.3
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the validity period has expired then
one of the following actions will be triggered automatically at start test.
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the sequence or cancel it. If the sequence is continued then the
message that the validity period has expired will be automatically saved
with the determination.
Cancel determination
The running determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
7.18.5 Establish a connection to the balance
Dialog window: Configuration ▶ Devices ▶ Properties ▶ RS 232 ▶ Connect
In order to establish a connection to a balance the button [Connect] has
to be pressed on the tab RS 232.
If then the print key on the connected balance is pressed, the data provi-
ded by the balance will be inserted in the following fields:
Device name
Name of balance.
Sample size
Sample size.
Sample size unit
Sample size unit.
ID1
Sample identification ID1.
ID2
Sample identification ID2.